Advertisement
Advertisement
Table of Contents
Related Manuals for Robotics Technologies Bus-Scan CR2
Summary of Contents for Robotics Technologies Bus-Scan CR2
- Page 1 ® A New Solution for You... A Replacement for CRS CR2 A/B...
- Page 2 1.0 Introduction Bus-Scan CR2 is a specialized version of our traditional BS 300 series of Child Reminder Systems. It is intended to provide a generalized replacement for the now-defunct CRS CR2 A/B systems that were manufactured by one of our competitors. Even though it is not meant to be an exact recreation of that product, it fulfills these criteria: ●...
- Page 3 Here are feature comparisons between the Bus-Scan CR2 and the CRS CR2 A/B: ® Bus-Scan CRS CR2 A/ ® Function Ignition ON (Yellow +12V) Prepares the system for operation. Arming Signal (Orange +12V) Arms the system OR... System will automatically ARM after 10 minutes w/door(s) closed. System has 2 door-sensing inputs: One for +12V / One for 0V (Gnd) If either the White or Blk/Gry Wire is Grounded (0V), the system will DISARM, and the interior lights will flash twice to confirm.
- Page 4 New CR2 Features 3-Position DIP Switch on Back of Unit 1. Timed Auto-arming (field-trip mode). In addition to arming the Bus-Scan CR2 by an input signal (8-way flashers, stop sign, etc.), you can choose to have the system automatically arm after the ignition has been on for 10 minutes, with both doors closed.
Need help?
Do you have a question about the Bus-Scan CR2 and is the answer not in the manual?
Questions and answers