Uplift Desk ACC024 Instructions

Package Contents:
Power adapter
UPLIFT Desk • 1-800-349-3839 • info@upliftdesk.com • www.upliftdesk.com
®
Illuminate™ LED Task Light
ACC024
Step 1
Plug the Power adapter into the DC port on the lower right-hand side of the
Lamp.
Step 2
Holding the base of the Lamp, swivel the main column upward, rotating it out 90
degrees.
Next, swivel out the Lamp's upper arm, up to its maximum adjustable range of
135 degrees. The light will swivel at the top joint 45 degrees in both directions.
Warning: When opening, closing, and adjusting the Task Light, please mind the
Lamp's joints to avoid clamping or pinching hands or clothing.
Position the light where you want it, where it's stable, and close to its power
source.
Step 3
Press the bottom button once to turn on the main light.
Pressing the + and - buttons will cycle through the light's 5 brightness levels.
Pressing the M button will cycle through the light's cool/warm/natural light modes.
The blue nightlight at the Lamp's base will automatically turn on when the light
is turned off. To turn off the night light, press and hold the bottom button for
three seconds. The blue light will turn off when the light is turned on.
Step 4
Plug in your USB devices via the port on the lower left-hand side of the lamp,
allowing you to power and charge your electronics.
Lamp
ACC024/R02