Summary of Contents for Santoemma HT1800
- Page 1 USER MANUAL FOR THE INSTANT HOT WATER UNIT MOD. HT1800 READ CAREFULLY BEFORE USING THE DEVICE Version 08/02...
- Page 2 INSTRUCTIONS FOR THE INSTANT HOT WATER UNIT HT1800 Safety instructions (read carefully) Every electrical device must be used for its particular function only, respecting the manufacturer’s instructions. Failure to adhere to the instructions could result in serious person injury, electric shock, fire or explosion.
- Page 3 FOR SAFETY: Do not let the machine being used by children and people unable to understand the danger connected with the use of electrical power. Do not bring the end of the suction hose or one of the accessories near your face or others’, particularly near ears and eyes: the sucked air could seriously damage them.
- Page 4 Parts provided with the heater Provided with the heater you find the following parts, necessary to fix the heater on a Santoemma machine: 2 metal brackets, to fix the heater on the machines model Sabrina-Maxi, Serena-Silent or Grace. 1 metal bracket, to fix the heater on the machines model Elite-Silent or Powerful.
- Page 5 1. Attach the device to the injection-extraction machine with the special metal brackets. This operation is very easy for a Santoemma machine. For machines of other brands, either you can use the heater as a separate unit, or you have to provide yourself with special brackets to attach it to the machine you already have.
- Page 6 8. Bring the water flow into action, by pressing the lever on the accessory: after about 30 seconds the coming out water will start heating, and it will reach its steady temperature after about 1 minute. In normal conditions, both the green and red light of the thermal protections are switched on. The RED light ON means that the resistor inside the heater is actually using electrical power, to heat the water.
- Page 7 In order to perform the recirculation, do the following: 1. Be sure that the pump of the machine is switched off and insert the solution pipe in the female quick disconnect coupling at the outlet of the heater. 2. Unscrew the special male coupling from the upper surface of the heater, and insert it in the quick disconnect female coupling that is located at the end of the solution pipe provided with the heater.
- Page 8 Milano, 23 Luglio 2002 DICHIARAZIONE DI CONFORMITA’ PER RISCALDATORE HT1800 DECLARATION OF CONFORMITY FOR THE HEATER HT1800 DECLARATION DE CONFORMITE POUR LE RECHAUFFEUR INSTANTANE HT1800 CE-KONFORMITÄTSBESCHEINIGUNG FÜR DEN DUIRCHLAUFERHITZER HT1800 DECLARACION DE CONFORMIDAD PARA EL CALENTADOR HT1800 Noi / We / Nous / Wir / Nosotros:...
Need help?
Do you have a question about the HT1800 and is the answer not in the manual?
Questions and answers