Triax TECW 211 User Manual page 9

User manual
At the second end where the Ethernet and Wi-Fi signals are wanted, you need to use a TECW 211
(with build-in Wi-Fi extender). On this second device, connect the "TV+WWW" F connector to the
wall outlet (TV port).
To remake the connection to the TV or a DVB-C set top box, so that the signal is passing through
the TECW 211, use the supplied coaxial fly lead between the TECW 211 "TV" port and your TV or
STB.
Connect any Ethernet devices – Smart TV, Game console, Blu-ray player, IP Set top Box etc. using
the supplied Ethernet patch cord. Connect your wireless devices by reading the instructions
detailed later in this user manual concerning the Wi-Fi settings.
Power up the 2 devices (TEOC 211 and TECW 211), the link between the devices is established
automatically, this is confirmed when the LED is ON. (It may take a few minutes to link.). The
terrestrial or cable TV signal can be passed through the device.
If you have more devices to connect onto your network, repeat the second device operation.
The schematics below illustrate how to create your fist network. More schematics examples are
available on www.triax.com
Before using the device, we recommend you to directly connect your PC to the LAN of the device
using an Ethernet cable. Usually your computer is setup to obtain an IP address automatically and
you don't need to change it.
9 EN