Summary of Contents for Warner Electric UM-50
- Page 1 Gen 2 Clutch/Brake UniModule UM-50, UM-100, UM-180 Service & Installation Instructions P-273-4-WE 819-0528 Vented Enclosed Version Optional...
-
Page 2: Table Of Contents
Mount Bracket on a C-Face Motor - 1040-M Mounting to other the warranty. Power Transmission Components Warner Electric UniModules are designed to Electrical Connections National Electrical Manufacturers Association Base Mounted Installing the Base Mount (NEMA) standards. They can be mounted to... -
Page 3: Mounting To A C-Face Motor
3. Secure the UniModule to the motor with the four (4) long mounting tie-bolts provided. Tighten the four (4) bolts alternately to ensure even alignment of the module. Tighten them to 30-35 foot pounds. P-273-4-WE • 819-0528 3 Warner Electric • 800-825-9050... -
Page 4: Mounting To A Reducer
Figure 4. Figure 2b Mounting to a Reducer 1. Warner Electric UniModules are furnished with a hardened key pre-mounted on the output shaft. Figure 4 2. Align the output shaft and key of the module... -
Page 5: Installing The Motor Mount Bracket
Overhung load data is provided in this manual for the Optional Motor Mount Kit, design engineer concerned with a specific problem Warner Electric part numbers: in this area. The maximum allowable overhung load UM-50/100......5370-101-078 which can be applied to the shaft of an UniModule UM-180.........5370-101-079... -
Page 6: Electrical Connections
26.7 26.7 Current UM-50 UniModule clutches and clutch/brakes operate (Ampheres) UM-100/180 on DC voltage. Warner Electric offers a complete Power UM-50 line of electronic controls to meet the needs of (WATTS) UM-100/180 almost any clutch or clutch/brake application. Each Coil Build Up... - Page 7 Simply repeat steps 1-3 above, but place the screwdriver between the face of the armature and its mating friction surface. Warner Electric • 800-825-9050 P-273-4-WE • 819-0528 7...
-
Page 8: Enclosed Unimodule Option
This arrangement eliminates the sudden change in If an Enclosed UniModule is required, an optional torque that results when auto-gapped armatures Cover Kit, Warner Electric part number 5370-101- engage. 076, can be purchased separately to enclose the open vents in the housing. - Page 9 In addition, Warner Electric module products, controls, and service parts information can be found in our catalog P-1234-WE. Call 815-389-3771 to request any of our catalogs.
-
Page 10: Warranty
Warner Electric LLC be liable for consequential, indirect, or incidental damages of any kind incurred by reason of the manufacture, sale or use of any defective product. Warner Electric LLC neither assumes nor authorizes any other person to give any other warranty or to assume any other obligation or liability on its behalf.