Listening To Radio; Presetting Stations - Samsung AH68-01663S Instruction Manual

Listening to Radio

You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or
manual tuning operation.
Remote Control Unit
1 2
Tune in to the
Press TUNER
desired station.
button.
• Automatic Tuning 1
The selection toggles back and
forth between "FM AM" each
time the FM button is pressed.
Automatic Tuning 2
Manual Tuning
Main Unit
Press the Function
1 2
Select a broadcast
button to select the
station.
desired band (FM,
AM).
Automatic Tuning 1
PRESET and then press
button to select the preset station.
Automatic Tuning 2
then press and hold
automatically search the band.
Manual Tuning
press
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
61
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
When is pressed, a
preset broadcast station is
selected.
Press and hold TUNING/CH to
automatically search for active
broadcasting stations.
Briefly press TUNING/CH to
increase or decrease the
frequency incrementally.
Press the STOP ( )
button to select
Press the STOP ( ) button
to select "MANUAL" and
button to
Press STOP ( ) to select
MANUAL and then briefly
to tune in to a lower or

Presetting Stations

You can store up to:
• FM
15 FM stations
15 AM stations • AM
Example: Presetting FM 89.1 in the memory
1 Press the TUNER 2
Press TUNING/CH
button and select the
to select "89.10".
FM band.
• •
Each time the button is pressed, Refer to Step 2 on page 61 to
the band switches between automatically or manually tune in
"FM AM". to a station.
4 Press 5 Press the TUNER
to select preset
MEMORY button
number. again.
• •
You can select between 1 and Press the TUNER MEMORY button before
'PRGM' disappears from the display.
15.
•
'PRGM' disappears from the display and
the station is stored in memory.
To tune in to a preset station, press
remote control to select a channel.
Frequency Modulation
Medium Wave
3
Press the TUNER
MEMORY button.
•
"PRGM" flashes in the display.
To preset another
6
station, repeat
steps 2 to 5.
on the
62
ENG