QNN Safe IF-1500E User Manual page 2

QNN SAFE AUSTRALIA PTY LTD
Unit 9 / 376 Newbridge Road, Moorebank NSW 2170
Closing instructions:
 Close the door
 Turn the handle counterclockwise to lock the door
Changing Master Code:
Please keep the door at opening position during the whole processing until fully
ensure that the code is changed correctly.
For security reasons, please change to your own code after the first opening.
Your code can be set up to 10 digits
 Open the safe door
 Press
then enter the Personal Code, then press
beep.
 Press
, press
 Enter the new Personal Code again then press
 Orange light on with one beep means the Personal Code has been change
successful
 Keep the door open, check and remember the code
Orange light off with two beeps means changing is fault. And the old Personal
Code is still in place.
Cautions:
 When the green light change to yellow, it means that the batteries need to be
replaced. Please replace new batteries as soon as possible.
ABN 47 168 078 233
Web site:
www.qnnsafe.com.au
Email:
info@qnnsafe.com.au
Phone: 02-87982669
and then enter a new Personal Code then press
Page 2 of 2
. Orange light on with one
to confirm.