Advertisement
Note:
A2 will not modify System Settings or have any
damages on your Smartphone/tablets. If you restart your
devices, please re-activate the tool with the same tutorial
steps.
Quick Guide to Activate GameSir Remapper
Prerequisite
1. Turn on your Smartphone/Tablet; navigate to
"Settings" → "Developer options" & enable Developer
options → allow USB Debugging. (Note: The ways to
enable "Developer options" are varied in different models
of Android Smartphones / Tablets.)
2. Download & install "GameSir World" App and open it.
https://gamesir.hk/pages/gamesir-world-app
Setup tutorials
1
1. Connect your GameSir Remapper to your phone by
connecting the Micro USB cable between your phone
and A2, and charge your phone by plugging the end of
A2 with USB connector into your phone charger, USB
port on your PC, or power bank... After connected to the
power supply, After connected to the power supply, the
power indicator light stays red, while the status indicator
blue light will flicker.
2. If the USB Debugging authorization pops up, please
enable USB debugging. After connected successfully,
the status indicator blue light stays on.
2
Advertisement
