Table of Contents
Advertisement
MCDD-100 MetaCarrier Detection Device
Ethernet-based Remote Product Management
The user defines two Community Strings for SNMP access:
•
Read Community
•
Write Community
For proper SNMP operation, the MCDD-100 MIB files must be used with the
associated version of the MCDD-100 M&C. Please refer to the MCDD-100 FW
Release Notes for information on the required FW/SW compatibility.
6.4
Web Server (HTTP) Interface
A user-supplied Web browser allows the full monitoring and control (M&C) of the MCDD-100
from its Web Server Interface. The MCDD-100's embedded Web application is designed for, and
works best with, Microsoft's Internet Explorer Version 7.0 or higher.
6.4.1 User Login
Type the MCDD-100's Management IP Address (shown here as http://xxx.xxx.xxx.xxx) into the
Address area of the user PC's Web browser:
The login page opens.
Enter the assigned User Name and
Password – the default for both is
comtech. Click [Log On].
If the User Name and Password are
accepted: The MCDD-100's Web
Server Interface Home (Info) page,
similar to the example shown here,
appears:
default = public
default = private
6–4
Revision 3
MN-MCDD100
Advertisement
Table of Contents
