Harman Kardon INVOKE Owner's Manual page 5

S A F E T Y
I N S T R U C T I O N S
Verify Line Voltage Before Use
The Invoke has been designed for use with 100-240 volt, 50/60 Hz AC current. Connection
to a line voltage other than that for which your product is intended can create a safety
and fire hazard and may damage the unit. If you have any questions about the voltage
requirements for your specific model, or about the line voltage in your area, contact your
selling dealer before plugging the unit in to a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied with your unit. It is not
recommend that extension cords be used with this product. As with all electrical devices,
do not run power cords under rugs or carpets, or place heavy objects on them. Damaged
power cords should be replaced immediately by an authorized service center with a cord
that meets factory specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always pull the plug; never pull
the cord. If you do not intend to use your speaker for any considerable length of time,
disconnect the plug from the AC outlet.
Do Not Try to Open the Invoke
There are no user-serviceable components inside this product. Opening the cabinet may
present a shock hazard, and any modification to the product will void your warranty. If
water accidentally falls inside the unit, disconnect it from the AC power source immediately,
and consult an authorized service center.
5