Summary of Contents for Rok 150-35-5048
- Page 1 500W Angle Grinder INSTRUCTION MANUAL Model No. 150-35-50489 500W Angle Grinder Warning: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE Made in China...
- Page 2 GENERAL SAFETY RULES WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS 1) Work area A.
- Page 3 H. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. i.
-
Page 4: Kickback And Related Warnings
Kickback and Related Warnings Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or any other accessory. Pinching or snagging causes rapid stalling of the rotating accessory, which in turn causes the uncontrolled power tool to be forced in the direction opposite of the accessory’s rotation at the point of the binding. -
Page 5: Safety Warnings Specific For Grinding And Abrasive Cutting-Off Operations
not match the mounting hardware of the power tool will run out of balance, vibrate excessively and may cause loss of control. g) Do not use a damaged accessory. Before each use inspect the accessory such as abrasive wheels for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked wires. -
Page 6: Safety Warnings Specific For Wire Brushing Operations
d) Wheels must be used only for recommended applications. For example: do not grind with the side of cut-off wheel. Abrasive cut-off wheels are intended for peripheral grinding, side forces applied to these wheels may cause them to shatter. e) Always use undamaged wheel flanges that are of correct size and shape for your selected wheel. Proper wheel flanges support the wheel thus reducing the possibility of wheel breakage. -
Page 8: Package Contents
Package contents The package contains the following parts: • Angle grinder • Side handle • Spanner Mounting and removing the guard • First remove the grinding wheel as described below. • Place the guard(4) on the machine as shown. • Tighten screw (6) firmly. •... - Page 9 150-35-50489 500W Angle Grinder Parts List...
- Page 10 150-35-50489 500W Angle Grinder Exploded View...
-
Page 11: Warranty Against Defect
Trade and commercial use: • 6 months on all ROK products. This guarantee covers material and workmanship defects only. In order for the guarantee to be acted on, the consumer must use the products strictly in accordance with their operating manual and for the purpose for which they are intended to be used.
Need help?
Do you have a question about the 150-35-5048 and is the answer not in the manual?
Questions and answers