Charging Devices; Cleaning And Maintenance - ETEKCITY A41-C Manual

Charging Devices

To charge a device, plug the device to a USB cable and
plug the cable into the desk lamp's USB charging port.
The device will begin to automatically charge.
NOTE: To charge a device, you must have a compatible
USB charging cable. The USB output is DC 5V./1.5A. If the
charging current is greater than 1.5A (i.e. iPad, tablets,
etc.), then the charging speed will be affected.The lamp's
light does not need to remain on in order to charge a
device.
Cleaning & Maintenance
Cleaning
Unplug any connected device and disconnect the lamp.
Use a slightly damp soft cloth to clean the surface of the
lamp. Wipe dry with a soft cloth.
Disassembly
For easy storage, unscrew the plastic cap located on the
bottom of the desk lamp, rotating counter clockwise.
Remove the cap to detach the lamp neck from the lamp
base.
7