Advertisement
Battery Installation
Off/On Button
Connection For Any MP3 Player
MODEL: BiM22 - rear
size: 215mm x 175mm
July 21, 2009
Color: Black
NOTE: THIS UNIT DOES
NOT CHARGE iPOD
2 Headphone Jacks
Using the BiM22
Thank you for purchasing the BiM22. Designed to work with your
iPod/MP3 player or any audio device, this system provides high quality
audio that invites your music to come out and play. Please read the
instructions carefully before operating the unit and keep for future
reference.
Installing/Replacing Batteries
1. Push to open the battery compartment door located on the bottom
inside of the unit.
2. Insert 4 "AA" R6 (UM-3) batteries (not included), checking that the
+ and – ends of the batteries match the drawing inside the battery
compartment. We recommend the use of alkaline batteries for longer
life.
3. Close the battery compartment cover.
For Best Performance
• We recommend the use of alkaline batteries for longer life.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
• Batteries are to be inserted with correct polarity.
• Remove exhausted batteries from the unit.
• Do not attempt to recharge non-rechargeable batteries.
• Remove the rechargeable batteries from the unit before charging.
• The supply terminals are not to be short-circuited.
• Batteries should be removed if the item will not be used for an extended
period of time, such as a month or longer, to prevent battery leakage
or damage.
• Rechargeable batteries should only be charged under adult
supervision.
• Only batteries of the same or equivalent type recommended are to be
used.
Listening to an iPod/MP3 player or other audio device
1. Plug the attached audio patchcord located inside the unit into the
headphone or Line-out Jack on your iPod or other audio device.
2. Turn on your iPod/MP3 player or other audio device, press play and
set desired volume on the device.
3. Press the Power On button located on the front of the unit.
4. Remember to turn unit OFF when not in use to save
batteries.
5. For private listening, connect up to two sets of headphones to the
headphone jacks located on the top front of the unit.
Doing so temporarily disables the main speakers.
NOTE: Connected iPhones create audio interference noise when
a call is received. Turn on Airplane mode to disable phone
while playing music.
Maintenance
•
Place the unit away from sources of direct sunlight or excessive
heat.
•
Protect your furniture when placing your unit on a natural wood and
lacquered finish.
•
Clean your unit with a soft cloth moistened only with mild soap and
water. Stronger cleaning agents, such as Benzine, thinner or similar
materials can mar the surface.
Advertisement
