Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Track Technologies LASERTRACK FLARE
- Page 1 USER MANUAL LASERTRACK FLARE...
- Page 2 Home Automation in optima forma! LaserTrack Flare can also be used to detect laser signals if selected in the settings menu on our website. Think of the police's laser gun. The detection of laser light is not subject to any regulation worldwide and as such is permitted everywhere.
-
Page 3: Table Of Contents
Led and buzzer codes ..................7 GENERAL INFORMATION LaserTrack Flare consists of multiple modules connected to each other via a net- work. For example, one or more transponders can be fitted to the front and rear of your vehicle, and there is a control module located behind or under the dashboard. -
Page 4: Information Display
A short beep sounds and the LED shows the last selected mode. YOUR LASERTRACK HAS THE FOLLOWING FEATURES: 1. Remote control: always active As a remote control, LaserTrack Flare operates fully automatically. Once your vehicle is within range of the gate or door transponders, the unique code is exchanged. -
Page 5: Laser Detection
2. Laser detection: Only active when selected in your 'My LaserTrack' account on the webpage. Laser detection automatically warns you of speed checks performed with laser guns. When this setting is selected, your speed can still be Attention! measured. • The LED on the information display flashes blue when Laser Detection is selected. -
Page 6: Delete Laser Jamming And Laser Detection
5. Delete laser jamming and laser detection Under some conditions you may wish to completely erase laser jamming and laser detection. • Press for more than 3 seconds; A short beep sounds and the LED turns blue. • The factory settings are loaded; Laser jamming and laser detection have now been erased. -
Page 7: Led And Buzzer Codes
7. Led and buzzer codes Buzzer Description Fading green/ System is starting up white Displays the number of connected modu- X times short les (control) Green System stand-by; Remote control activa- continuously ted, Laser jamming activated System stand-by; Remote Blue control activated (laser detection continuously disabled) - Page 8 Zuidergracht 21 | 3763 LS Soest | the Netherlands | info@tracktechnologies.nl | +31 (0)35 760 5760 www.laser-track.com...
Need help?
Do you have a question about the LASERTRACK FLARE and is the answer not in the manual?
Questions and answers