Transport; Troubleshooting - Medion MD 16703 User Manual

Transport

1. Unplug the appliance from the safety socket.
2. Remove all bottles and storage shelves from the inside of the appliance.
3. Screw in the adjustable feet
4. Tape the door in place using adhesive tape.
5. Ensure that the appliance is transported in an upright position to avoid any
damage to the cooling system.

Troubleshooting

Faults may occur during operation. Please use the following table to check whether
you can resolve the problem yourself. All other repairs are prohibited and will
invalidate the warranty cover. In the event of a fault, contact our Service Centre or
another suitable professional repair workshop.
Malfunction
The appliance is
not working.
The temperature is
not low enough.
9 .
Problem
The electrical
circuit has been
interrupted.
The door does not
seal properly when
closed or has been
opened too often.
The appliance is dirty.
Rectifi cation
− Check whether the mains plug
is plugged in.
− Check whether the mains
socket is live by plugging in
another electrical device (e.g. a
bedside lamp).
− Check whether the connection
cable has been damaged.
− Arrange the bottles so that they
do not prevent the door closing
properly.
− Open the door for a short
period of time.
− Check the door seal.
− Clean the appliance.
Transport
13