Samsung PPM50M7F Owner's Instructions Manual page 10

Rear of the PDP Display
Rear of the PDP Display
➢
 You can connect a Composite (Video) without a
distributor as you would connect a PC.
 Select ID input on the menu. Use the numeric
buttons to enter the ID for PDP Display
adjustment. You can operate the remote
control only for the PDP Display that has been
selected.
 For details about Multiple Display Control, refer
to "Setting the MDC (Multiple Display Control)"
on page 24.
Example for 2x2 Video Wall connections
Example for Multiple Display Control connections
English - 10
2
Y/P /P
B R
L/R
1 Connect the Component IN port of the
distributor and the Component OUT port
of the device that supports the Component
interface such as a DVD player using the
Component video and audio cables.
2 Connect the Component IN port on
the rear panel of each PDP and the
Component OUT port of the distributor
using the Component video and audio
cables. (A distributor has multiple
Component OUT ports.)
Distributor
1
DVD