Table of Contents
Advertisement
Connecting Speakers
The speakers MUST have more than 7watts rating (impedance 8ohm).
How to Connect
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP
matching the "+" and "-" ends of the cable with the diagram on the PDP.
Connecting PDP and Speakers / Stand and Speakers
1
Fix the bracket onto the guide pole located on the rear
of speaker and fasten the screws.
2
After removing the three screes on the PDP, clamp the
speaker and the PDP together and fasten the screws.
Guide
pole
Guide
pole
22
Speaker Audio Cable
• Stand and speakers
Guide
pole
<Separately sold: Stand>
Connecting a VCR/Cable Box
Power Plug
Audio Cable
S-Video Cable
Video Cable
How to Connect
1
Connect Video/S-Video cable between the Video/S-Video Output jack on the VCR/Cable
box and the Video Input jack on the PDP.
• For better video, you can use a S-Video cable.
• You can attach the
(supplied) to the both jacks of the Video cable.
Ferrite Cores
Simply set the
right under the jacks.
Ferrite Cores
2
Connect an Audio cable between the Audio Output jack on the VCR/Cable box and the
Audio Input jack (Video) on the PDP.
Videotape Playback:
1. Turn on PDP and press the Video or S-Video(if S-Video jack is connected.) button on your
remote control.
2. Turn on your VCR, insert a videotape and press the Play button.
• For an explanation of Component video, see your VCR/Cable Box owner's instruction.
23
Advertisement
Table of Contents
