Samsung PN63A650T1F User Manual page 96

Network Test
You can test or confirm the network connection status after setting up the network.
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2
P ress the ▲ or ▼ button to select Wireless Network Setup, then press the ENTER
button.
3
P ress the ▲ or ▼ button to select Network Test, then press the ENTER button.
The current network settings will appear.
➣
If no Access Point Select is set up, the test cannot be completed.
➣
(See page 95)
Press the EXIT button to exit.
BN68-01532A-Eng.indb 96
English - 6
Network selection : Wireless
Cable Network Setup
WirelessNetworkSetup
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgade
Wireless Network Setup
Internet Protocol Setup : Auto Setup
Network Test
Access Point Select : AP1
0 0 0
IP Address :
0 0 0
Subnet Mask :
0 0 0
Gateway :
0 0 0
DNS Server :
Move Enter
Network Test
MAC Address
IP Address, Subnet, Gateway, DNS Server
Gateway Ping
Domain Ping
Network Test Completed.
Your network is operating properly. If you still have a
network problem, contact your network service
provider.
2008-04-18 오후 8:39:12
►
0
0
0
0
Return
Return