Advertisement
Quick Links
Monitor Management System
Programming: Surround 5.1
K+H Vertriebs- und
Entwicklungsgesellschaft mbH
Auf dem Kessellande 4a •
P
RO
Operators Guide
Pre-Programmed Setups
Connection Diagram
30900 Wedemark/Germany
M 1012
Tel: +49 (0) 5130 5848-0
Fax: +49 (0) 5130 5848-11
www.klein-hummel.com
www.klein-hummel.com
058-E0159
Version 060426
SW Rev KH 2.000
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Klein + Hummel PRO M 1012
- Page 1 Monitor Management System M 1012 Operators Guide Pre-Programmed Setups Connection Diagram Programming: Surround 5.1 058-E0159 Version 060426 SW Rev KH 2.000 K+H Vertriebs- und Tel: +49 (0) 5130 5848-0 Fax: +49 (0) 5130 5848-11 Entwicklungsgesellschaft mbH www.klein-hummel.com Auf dem Kessellande 4a • 30900 Wedemark/Germany www.klein-hummel.com...
-
Page 2: Operation Instructions
(Taste blinkt!) Flashes!) The PRO M 1012 has 80 Basic Configurations stored in internal memory. Twelve of these may be quickly recalled as preprogrammed setups. Basic Configurations define all signal routing and gain settings plus all parameter values configured in Program Mode for the input and output channels... - Page 3 A Basic Configuration defines all signal routing and gain settings plus all parameter values • for the input and output channels The PRO M 1012 has 80 Basic Configurations stored in internal memory. Twelve of these • may be quickly recalled as preprogrammed Setups by pressing the numbered SETUP keys (or SHIFT + SETUP).
- Page 4 “STORE SETUP” menu and verify by pressing it • Select desired setup (1...12) by turning the incremental encoder, then press to store • Press “PROGRAM MODE” key (will stop flashing, system works in normal operation mode again) PRO M 1012 page 4 of 6...
- Page 5 4 Rear Panel Connection Diagram Project-File: Pro M 1012 Surround 5.1_GUI2.004_111005 .prj PRO M 1012 page 5 of 6...
- Page 6 Project File to the Configuration Manager (see A2) before transferring a new project file to the PRO M 1012! Connect the 9-Pin D-SUB RS-232 connector on the rear panel of the PRO M 1012 to the •...
Need help?
Do you have a question about the PRO M 1012 and is the answer not in the manual?
Questions and answers