Printing The Photo Image - Samsung PDP-TELEVISION Owner's Instructions Manual

Printing the Photo Image

By connecting the TV to printers with PictBridge support (sold separately), you can send photo images from the
memory device directly to the printer with a few simple operations.
To Connect a Printer Using a USB Cable
Side Panel
➢
Some printers supporting PictBridge may not be compatible with this TV.
Move
219x171
6 KBytes
May 05,2006
3/130
Move Enter Photo Menu
Slide Show
Rotate
Zoom
Copy
Delete
Print
List
Exit
Print
Do you want to print the file?
Photo0001
Yes No
Move Enter
PictBridge-supporting
Photo Printer
USB Cable
To Print a Photo Image
1 After switching the mode to WISELINK, select a memory device that you
have installed. (Refer to page 29)
Press the œ or √ button to select Photo, then press the ENTER (
2
button. JPEG files and existing folders are displayed.
Enter Return
Press the .../†/œ/√ buttons to select a file, then press the ENTER (
3
œœ 1/10 Page √√
button.
➢
Pressing the button over a photo icon shows the currently selected
photo in full screen.
➢
Pressing the button over a folder icon shows the JPEG files included in
the folder.
Return
4 Press the INFO (
Zoom, Copy, Delete, Print, List).
Press the ... or † button to select Print, then press the ENTER (
button.
Press the œ or √ button to select Yes, then press the ENTER (
5
The selected photo image will be printed.
To exit WISELINK mode, press the WISELINK button on the remote control.
➢
Note that the edge of the image might be cut and may not be printed
depending on your printer model.
Return
➢
The printed image may be smaller than the original size.
➢
Press the WISELINK button on the remote control to turn on the WISELINK
mode.
ΠTurn your printer power off.
´ Connect an USB cable (sold separately)
between the PictBridge jack on the TV
and the USB jack on the printer.
ˇ Turn your printer's power on.
) button to display the option (Slide Show, Rotate,
English - 38
)
)
)
) button.