Table of Contents

Advertisement

SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE.
Products and specifications discussed herein are for reference purposes only. All information discussed herein is provided on an "AS IS" b asis, without warranties
of any kind. This document and all information discussed herein remain the sole and exclusive property of Samsung Electronics. No license of any patent,
copyright, mask work, trademark or any other intellectual property right is granted by one party to the other party under this document, by implication, estoppel
or other-wise. Samsung products are not intended for use in life support, critical care, medical, safety equipment, or similar applications where product failure
could result in loss of life or personal or physical harm, or any military or defense application, or any governmental procurement to which special terms or
provisions may apply. For updates or additional information about Samsung products, contact your nearest Samsung office. All brand names, trademarks and
registered trademarks belong to their respective owners.

Advertisement

Table of Contents
loading

Summary of Contents for Samsung Semiconductor ARTIK 530

  • Page 1 SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE. Products and specifications discussed herein are for reference purposes only. All information discussed herein is provided on an "AS IS" b asis, without warranties of any kind. This document and all information discussed herein remain the sole and exclusive property of Samsung Electronics. No license of any patent, copyright, mask work, trademark or any other intellectual property right is granted by one party to the other party under this document, by implication, estoppel or other-wise.
  • Page 2: Table Of Contents

    Block diagram ....................................... 7 Mechanical Drawings ................................... 7 ARTIK 530 Module ................................10 ARTIK 530 Module Specification ................................ 10 ARTIK 530 Development Board Interposer Board ......................11 Interposer Board Boot mode Configuration ............................ 12 USB OTG ....................................... 13 HDMI 1.4a ......................................13 LVDS ........................................
  • Page 3: List Of Figures

    Figure 2. ARTIK 530 Development Board ..........................7 Figure 3. Mechanical Drawing ARTIK 530 Development Board Interposer Board all dimensions are in [mm] ..8 Figure 4. Mechanical Drawing ARTIK 530 Development Board Platform Board all dimensions are in [mm] ..... 9 Figure 5.
  • Page 4: Version History

    Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide ERSION ISTORY Revision Date Description Maturity Samsung Confidential Specifications in this document are tentative and subject to change.
  • Page 5: Handling Guide

    Environment Temperature Humidity High temperature or humidity deteriorates the characteristics of ARTIK 530 Board, therefore, do not store or use the ARTIK 530 Board under such conditions. Mechanical Shock Do not to apply excessive mechanical shock or force on the ARTIK 530 Board.
  • Page 6: Artik 530 Development Board Overview

    FEATURES The ARTIK 530 Development Board consists of 1x Interposer Board , 1x Platform Board, and 1x IF Board. The Interposer Board does include the ARTIK 530 Module. The ARTIK 530 Development Board is an affordable approach for developing an IoT solution.
  • Page 7: Block Diagram

    ARTIK 530 Development Board User Guide LOCK DIAGRAM Figure 2 shows the block diagram of the ARTIK 530 Development Board, if you want more information on the ARTIK 530 Module please consult the ARTIK 530 Module Datasheet. Figure 2. ARTIK 530 Development Board...
  • Page 8: Figure 3. Mechanical Drawing Artik 530 Development Board Interposer Board All Dimensions Are In [Mm]

    Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide Figure 3. Mechanical Drawing ARTIK 530 Development Board Interposer Board all dimensions are in [mm] Samsung Confidential Specifications in this document are tentative and subject to change.
  • Page 9: Figure 4. Mechanical Drawing Artik 530 Development Board Platform Board All Dimensions Are In [Mm]

    Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide Figure 4. Mechanical Drawing ARTIK 530 Development Board Platform Board all dimensions are in [mm] Samsung Confidential Specifications in this document are tentative and subject to change.
  • Page 10: Artik 530 Module

    PECIFICATION The ARTIK 530 Module is designed for IoT devices and it contains a lot of functions based on a Linux system. Not only multimedia functions but also network functions for example Wi-Fi or ZigBee. In addition the ARTIK 530 Module has mass storage functionality and its own security solution.
  • Page 11: Artik 530 Development Board Interposer Board

    OARD The Interposer Board as depicted in Figure 5 highlights the most important components on the Interposer board. Figure 5. ARTIK 530 Development Board Interposer Board Left Top Side, Right Bottom Side Samsung Confidential Specifications in this document are tentative and subject to...
  • Page 12: Interposer Board Boot Mode Configuration

    ONFIGURATION This section describes the various boot modes that are supported on the ARTIK 530 Development Board. Table 2 and Figure 6 show how to manipulate SW4 and where SW4 is located on the Interposer Board to set the various booting options that are available on the ARTIK 530 Development Board.
  • Page 13: Usb Otg

    Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide USB OTG The Interposer board has 1x USB OTG connector located as can be seen in Figure 7. Figure 7. USB OTG Interface location on the Interposer Board HDMI 1.4 The Interposer board has 1x HDMI 1.4a connector (Micro D-Type) located as can be seen in Figure 8. The following video formats are supported: 480p/480i @59.94Hz/60Hz, 576p/576i@50Hz...
  • Page 14: Lvds

    Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide LVDS The Interposer board has 1x LVDS Interface containing 5x data channels and 1x clock channel, its location can be seen in Figure 9. The available maximum resolution is 1920x1080@60fps. Figure 9. LVDS Interface location on the Interposer Board THERNET The Interposer board has 1x Ethernet Interface, its location can be seen in Figure 10.
  • Page 15: Antenna

    Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide NTENNA Antenna which is enclosed in KIT has to be assembled on Interposer board if use Wifi/BT and Zigbee. Antena spec can be seen in Table 3 Table 3 Antenna spec...
  • Page 16: Artik 530 Development Board Platform Board

    OARD The Platform Board as depicted in Figure 12 highlights the most important components on the Interposer board. Figure 12. ARTIK 530 Development Board Platform Board Left Bottom Side, Right Top Side Samsung Confidential Specifications in this document are tentative and subject to...
  • Page 17: Configuration Of External Power Source

    Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide ONFIGURATION OF XTERNAL OWER OURCE Through selection of the Jumpers JP1-JP4 the IO power source can be selected to either DC-5V or to Charger Output. Figure 13 shows how to set the various jumpers to switch between power sources.
  • Page 18: Earjack Interface

    Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide NTERFACE The Platform board has 1x 4 pin ear jack interface supporting stereo audio as can be seen in Figure 15. Figure 15. Ear Jack Interface location on the Platform Board...
  • Page 19: Usb Host 2.0 Interface

    Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide Figure 17. MIPI CSI Interface Location on the Platform Board USB H 2.0 I NTERFACE The Platform board has 1x USB 2.0 Interface. The location of the USB 2.0 interface can be seen in .
  • Page 20: Connector To If Board Interface

    Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide IF B ONNECTOR TO OARD NTERFACE The Platform board has 1x expansion connector that can be seen in Figure 19. This connector enables expansion Figure 19. Expansion Connector Interface location on the Platform Board...
  • Page 21: Artik 530 Development Board If Board

    Figure 20 shows the highlights of the connector IF board. In addition Table 4 with J2 and Table 5 with J3 show the pinout of the connectors with its meaning. Figure 20. ARTIK 530 Development Board IF Board Table 4. Connector J2...
  • Page 22: Configuration Of External Power Source

    Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide Table 5. Connector J3 Pin Name Pin Number Pin Number Pin Name MICOM_GPIO1 MICOM_GPIO2 MICOM_GPIO3 MICOM_GPIO4 MICOM_GPIO5 DC5V MICOM_GPIO6 MICOM_GPIO7 VBAT_MAIN MICOM_GPIO8 MICOM_GPIO9 AP_VDDIO MICOM_GPIO10 MICOM_GPIO11 VDD_EXT1P8_ALIVE MICOM_GPIO12 MICOM_GPIO13 VDD_EXT1P8 MICOM_GPIO14...
  • Page 23: Artik 530 Development Board Booting

    ARTIK 530 D EVELOPMENT OARD OOTING This section will describe how to setup a connection with the ARTIK 530 Module using the Serial Port Connection and a variety of tools. ERIAL ONNECTION You can use a typical Linux serial console as depicted in Figure 22, using the serial connector. If your PC does not have a serial port use the USB serial cable instead.
  • Page 24: Terminal Emulator Installation

    NSTALLATION Setting up a connection with the ARTIK 530 Module can be done in a variety of ways. Here we choose to install PuTTY a free serial console. The software can be downloaded from http://www.putty.org/. Once downloaded go through the following steps: Open the device manager on the control panel.
  • Page 25: Power On The Artik 530 Development Board

    Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide Power on the ARTIK 530 Development Board and hold the power button for about 1 second. You should see booting messages from the ARTIK 530 Module Once booting is completed you can exercise the ARTIK 530 Module using Fedora Linux commands.
  • Page 26: Figure 26. Power Button Location On The Development Board

    Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide Figure 26. Power button location on the development Board Samsung Confidential Specifications in this document are tentative and subject to change.
  • Page 27: Legal Information

    Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide EGAL NFORMATION INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH THE SAMSUNG ARTIK™ DEVELOPMENT BOARD AND ALL RELATED PRODUCTS, UPDATES, AND DOCUMENTATION (HEREINAFTER “SAMSUNG PRODUCTS”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. THE LICENSE AND OTHER TERMS AND CONDITIONS RELATED TO YOUR USE OF THE SAMSUNG PRODUCTS ARE GOVERNED EXCLUSIVELY BY THE SAMSUNG ARTIK™...

Table of Contents