C h a p t e r 5
P C D
I S P L AY
Using Your TV as a Computer (PC) Display
How to Connect Your PC to the TV
Note: This figure shows the Standard Connector-jack panel. The actual configuration on
your TV may be different, depending on the model.
TV rear panel
• PC AUDIO INPUT
Connect these to the audio-output jacks on your PC.
• PC VIDEO INPUT
Connect to the video output port on your PC.
How to Set up Your PC display
"Auto" allows the TV to self-adjust to the incoming video signal. The values of fine,
coarse and position are adjusted automatically.
Press the TV/VIDEO button on the remote control to select the PC Analog mode.
1
Press the AUTO button on the remote control or top panel.
(refer to pages 5.3~5.4).
Note: When a PC digital signal is input, Contrast, Picture
Adjustment, Position Adjustment, Color Adjustment and Set-
ting Default will not operate.
ENG 5.1
PC rear
Note: PC connec-
tions may depend on
the user's PC.