Summary of Contents for Groov-e GV-PS753
- Page 1 GV-PS753 PORTABLE CD PLAYER WITH DAB / FM DIGITAL RADIO MENU CD MODE SNOOZE I N S T R U C T I O N MAN U A L...
- Page 2 WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: SHOCK HAZARD-DO NOT OPEN LIGHTNING FLASH WITH ARROWHEAD SYMBOL - EXCLAMATION POINT - within an equilateral triangle, within an equilateral triangle, is intended to alert the is used to indicate that a specific component shall be user to the presence of uninsulated dangerous...
-
Page 3: Safety Instructions
SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. 2. WATER AND MOISTURE - The appliance should not be used near water. 3. VENTILATION - The appliance should be situated so that its location or position does not interfere with its proper ventilation. -
Page 4: Power Sources
POWER SOURCES to a wall outlet to AC IN Insert 8 x “C” size batteries into the battery compartment AC POWER You can power your portable system by plugging the detachable AC power cord into the AC inlet at the back of the unit and into a wall AC power outlet. Check that the rated voltage of your appliance matches your local voltage. -
Page 5: Location Of Controls
LOCATION OF CONTROLS FM ANTENNA CD DOOR VOLUME CONTROL... - Page 6 LOCATION OF CONTROLS 11. Stop 1. Speaker 2. LCD 12. Play/Pause/Select Display 13. Aux in 3. Power/Mode 14. Headphones 4. Preset 15. Volume Control 5. Menu/Info 6. CD mode/Scan 16. Carry handle 7. Prev/Skip/Tune- 17. CD compartment 8. Next/Skip/Tune+ 18. Telescopic antenna 9.
-
Page 7: Adjusting The Volume
OPERATION Initial set-up Press and release the Power/Mode button. The first time you switch on your Boombox or if the station list is empty, your Boombox will automatically begin to scan for DAB radio stations. A progress bar will show the progress of the scan and the number of stations found during the scan will also be displayed. -
Page 8: Alarm Setting
OPERATION 6. Set date is displayed and the day will flash. Press button to select and press the Select button, to set the day, month and year, using the same method as you used to set the time. When you confirm the correct date. ‘Time Saved’ is displayed and the display returns to <Set Time/Date>. -
Page 9: Changing Dab Stations
OPERATION Changing DAB stations In DAB mode: 1. Press the button to select through the available stations. 2. When the station that you would like to listen to is displayed, you can wait a short while and your Boombox will tune to your displayed station or you can press and release the Select button. -
Page 10: Scanning For Dab Stations
OPERATION Scanning for DAB stations With DAB radio, additional stations and services regularly become available so it’s a good idea to carry out a manual scan every now and then to make sure that you have the most up to date station listing stored within the memory of your Boombox. If you have moved your Boombox to another location, e.g.: if you go on holiday, then it’s also a good idea to carry out a manual scan. -
Page 11: Tune To A Dab Station Preset
OPERATION Tune to a DAB station preset In DAB mode: 1. Press and release the Preset button. ‘Preset Recall’ is displayed together with the number of the current preset location. 2. Press the button to select the Preset location and station that you would like to listen to (1-10). -
Page 12: Dynamic Range Control (Drc)
OPERATION • Signal information The data rate at which the signal is being transmitted. • Signal Strength A row of solid rectangles will be displayed to indicate the actual signal strength that you are receiving. An empty within the row of solid rectangles will indicate the minimum signal strength for acceptable listening. -
Page 13: Fm Radio Mode
OPERATION FM Radio mode Check that your Boombox is in FM radio mode. If you are not already in FM mode, briefly press and release the Power/Mode button, until you are in FM mode (check the display). When your Boombox is in FM mode it can receive Radio Data System or ‘RDS’ information if this is being transmitted by the broadcaster. -
Page 14: Changing The Scan Setting
OPERATION Changing the scan setting In FM mode: 1. Press and hold the Menu/Info button to enter the menu options. ‘<Scan setting>’ will be displayed. Press and release the Select button. There are now two different options to choose from and the current setting will have an ‘*’... -
Page 15: Storing An Fm Station Preset
OPERATION Storing an FM station preset Your Boombox can store up to 10 FM radio stations in its preset memories for instant access to your favourite stations. 1. Tune the Boombox to the FM radio station that you wish to preset. 2. -
Page 16: Fm Display Information
OPERATION FM display information When listening to an FM station you can change the information that will appear on the second line of the display. There are several different types of information that are sent by the broadcaster. • Radio text (RT) This is scrolling text information supplied by the broadcaster. -
Page 17: Programmed Play Mode
OPERATION CD controls You can use the following controls on your Boombox in CD mode. • Play Press and release the button. The first track will begin to play, and the track number and the elapsed time of the track will be displayed. •... -
Page 18: Repeat Mode
OPERATION Repeat mode 1. Press and release the CD MODE/SCAN button. ‘RP1’ is displayed. Continuously press and release the CD MODE/SCAN button to cycle through the available options of: • Repeat one (current track). ‘RP1’ is displayed. • Repeat all (all the tracks on the CD). ‘ALL’ is displayed. •... -
Page 19: Aux Mode
OPERATION AUX mode Check that your Boombox is in AUX mode. If you are not already in AUX mode, briefly press and release the Power/Mode button, until you are in AUX mode (check the display). Using a 3.5mm audio input connection cable (not included), Aux in allows for a quick and easy connection to an external sound source. -
Page 20: Display Language
OPERATION Display language You can change the display language of your Boombox, there are 4 options available; English, French, German and Italian. Note: An ‘*’ will be displayed next to the current setting. In DAB or FM mode: 1. Press and hold the Menu/Info button to enter the menu options 2. -
Page 21: Troubleshooting
TROUBLE SHOOTING Troubleshooting If you are experiencing problems with your Boombox, there are some quick and easy checks that you can do, which may help to solve the problem. CD Does not play: Check that you are in CD mode. Press and release the Power /Mode button to change the mode (check the display). -
Page 22: Specification
(ensure that you have your warranty or proof of purchase available). Should you need further assistance, please contact us directly: info@groov-e.co.uk. The warranty period is 12 months from date of purchase Unit J, Braintree Industrial Estate...
Need help?
Do you have a question about the GV-PS753 and is the answer not in the manual?
Questions and answers