Samsung LT-P2035 Owner's Instructions Manual page 15

01-12_EN 1/9/04 8:02 PM
I
N S TA L L AT I O N
4
Connect a coaxial
cable between the
ANTENNA OUT
terminal on the
cable box and the
B–IN terminal on the
A/B switch.
5
Connect another
cable between the
other OUT terminal
on the splitter and
the A–IN terminal on
the RF (A/B) switch.
6
Connect the last
coaxial cable between
the OUT terminal on
the RF (A/B) switch
and the VHF/UHF
terminal on the rear
of the TV.
After you've made this connection, set the A/B switch to the "A" position for normal
viewing. Set the A/B switch to the "B" position to view scrambled channels.
(When you set the A/B switch to "B," you will need to tune your TV to the cable box's
output channel, which is usually channel 3 or 4.)
Page 9
English-
9