BREWISTA NutraMilk Quick Start Manuals

QUICK
START
GUIDE
Assemble the NutraMilk
• Carefully align cutting blade with center post of base
and press firmly to install.
WARNING: LACERATION HAZARD - Handle
blade carefully; it is very sharp. Make sure
unit is unplugged before installing or
removing blade.
• Place wiper blades into inner filter.
• Replace lid and twist
clockwise to lock into
place.
• Lower arm to lock into
top of lid.
• Plug the power cord
into a grounded wall
outlet. Refer to User
Manual for grounding
instructions.
• Press the power
switch at the back of
the appliance. The
LCD readout will
display "00".
What's in the Box?
Scan for Video
(Continued)
Making Alternative Butter
2
Lid
Recipe Book
Wiper Blades
Dispensing
Spigot
Cutting Blade
Inner Filter
Motor Base
Mixing Basin
Cleaning Brush
•
Add ingredients.
•
Refer to User Manual
or Recipe Book for
recommended ingredient
measurements.
Assemble the NutraMilk
1
• Set the base on a flat
surface with arm tilted
up from the base.
1
• Place the mixing basin
on the center of the
base with spigot hole
towards the front (1).
• Twist basin to lock in
place (2).
3
• Insert neck of the
dispensing spigot into
hole at front of the
mixing basin until it
clicks into place (3).
• Rotate the lid counter-
clockwise to unlock
and remove.
• Insert the inner filter
within the mixing
basin and center it into
position.
•
Press the BUTTER button, then the START/STOP
button to start the butter cycle.
•
Refer to User Manual or Recipe Book for
recommended processing times for various
ingredients.
2