Resetting The Picture Settings To The Factory Defaults - Samsung LN22A450C1 User Manual

Setting the Blue Only Mode
This function is for AV device measurement experts. This function displays the blue signal
only by removing the red and green signals from the video signal so as to provide a Blue
Filter effect that is used to adjust the Color and Tint of video equipment such as DVD
players, Home Theaters, etc.
Using this function, you can adjust the Color and Tint to preferred values appropriate to
the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow
Color Bar Patterns, without using an additional Blue Filter.
1. F ollow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 21).
2. Press the ▲ or ▼ button to select "Blue Only Mode", then press the ENtER
3. Press the ▲ or ▼ button to select "Off" or "On", then press the ENtER
Press the ExIt button to exit.
"Blue Only Mode" is available when the picture mode is set to "Movie" or
"Standard".

Resetting the Picture Settings to the factory Defaults

1. Press the MENU button to display the menu.
Press the ENtER
button, to select "Picture".
2. Press the ▲ or ▼ button to select "Reset", then press the ENtER
Press the ▲ or ▼ button to select "OK" or "Cancel" then press the ENtER
button.
Press the ExIt button to exit.
Each mode can be reset.
button.
button.
button.
English - 
tV Picture Options
Color Tone : Normal
Size : Wide
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Blue Only Mode : Off
Move Enter
tV Picture Options
Color tone : Normal
Size : Wide
Digital NR : Auto
DNle : Off
hDMI Black Level : Normal
Blue Only Mode : Off
Off
On
Move Enter
tV Picture
Mode : Standard
Backlight
Contrast
Brightness
Sharpness
Color
tint G 0
Detailed Settings
Picture Options
Reset : OK
OK
Cancel
Move Enter
►
►
►
►
►
►
Return
Return



0
0
R 0
Return