Abe CS8106 User Manual

TM
CS8106 / Abe
Bluetooth Handsfree Car Kit
with LCD Display
CS8106(BT77AD)
User Manual
1. BT77AD profile and its functions..........................................3
1.1. Profile.................................................................................3
2 How to set up the BT77AD....................................................4
3. How to mount the BT77AD in the car ...................................4
4. LCD Display status ..............................................................6
4.1. On / Off and Pairing..............................................................6
4.2. Calling in.............................................................................8
4.3. Calling out..........................................................................9
4.4 On Line............................................................................... 10
4.5 Battery charging.................................................................12
5 . Maintenance and Safe Use
6. Electrical ...........................................................................14
7. Package Contents
8. Federal Interference Statement
LD77A
LCD plug
Note: BT77AD is an optional feature .
Always avoid contact with humidity or heavy soiling.
Any use other than the one described above will damage the product. Moreover,
there is a danger, for example, short-circuits, fire, electric shock, etc. No part of
the product must be modified or rebuilt and the housing must not be opened!
Observe the safely instructions at all times!
All company names and product designations contained herein are trademarks of
the respective owners. All rights reserved.
1. BT
1.1. Profile(Fig.1)
®
The backlight will be on automatically for 10 seconds when there is an incoming call or
when any key operations are performed directly from the car kit.
will not be turned on when
Environmental
friendly
Table of Contents
2 How to set up the BT 77AD
Insert fully the LCD plug into the LCD socket of BT 77AD before the Carkit is turned
on. (please refer to figure 2-3.)
.................................................14
3.How to mount the BT77AD in the car
..............................................................15
Use the Alcohol Pad to clean the surface of a desired position on the top of the
●
..........................................16
dashboard.
Use the 2-side tape to attach the metal stand on the cleaned area.
●
Put the BT77AD into an appropriate position(Refer to Fig.4)
●
Slide the LCD to the metal stand.
●
1
LCD SOCKET
BT 77AD
2
77A profile and its functions
Battery icon
6
5
Metal Stand
with 2-side tape
LCD plug(
4
BT77AD )
1 Phone 1 icon 2 Phone 2 icon
3 Mute icon
Fig. 1
Note that the backlight
key operations are performed from the mobile phones.
3
LCD Only( )
Car Charger Only
( )
Fig. 2 Fig. 3
4
BT77AD
1.Attach the metal stand to the desired
position.
Dashboard
Metal Stand
2.Place the BT77AD on the sun visor.
BT77AD
UNIT
3.Slide the LD77A LCD display into the
mental stand.
Windshield
Air
suckers
LD77A
Fig. 4
5
4. LCD Display status
When the LCD Display unit is properly connected to a Car Kit,it will provide you
with the status of the Car Kit's operations. For detailed operations, please
refer to the appropriate Car Kit user manuals.
4.1. On / Off and Pairing
After the car kit has been powered
on, it will stay on idle. Before it is
connected to the mobile phone,the
S4
S1 S3 S3
LCD screen displays "READY".
When the Car Kit is in pairing mode,
the LCD screen displays "PAIRING"
S4
S1 S3 S3
6
While the car kit is connecting to the
mobile phone, the LCD screen disp-
lays "CONNECTING . "
S4
S1 S3 S3
After the car kit has connected to the
mobile phone successfully, the LCD
screen displays "CONNECTED". S4
S1 S3 S3
If you press the ON / OFF key for about
5 seconds to turn off the car kit,the LCD
screen displays"OFF for a few seconds "
S4
S1 S3 S3
before it is completely off.
7
4.2. Calling in
When there is an incoming call, the LCD
screen displays "RINGING", or its caller
S4
S1 S3 S3
ID, if it is received.
Or Caller ID
Note: Some mobile phones may not
display Caller ID via this LCD Display
unit.
S4
S1 S3 S3
When the call is answered, the LCD
screen displays"ON LINE".
S4
S1 S3 S3
If the call is rejected, it will go back to
idle state and the LCD screen displays
"CONNECTED". S4
S1 S3 S3
Abe/CS8106
8