Disney P250DVD Manual page 11

Operations
● Looping will run from set point A to set point B until you turn off Repeat. Press A-B again to cancel
A-B loop mode.
● When playing a SVCD, VCD or CD disc, you can repeat a specific segment only in one track.
When the next track begins, A-B Repeat turn off automatically.
● When playing a DVD disc, you can repeat a specific segment only in one title/chapte
13. Play Modes
The contents of each disc menu vary according to how the disc was authored and what features are
included. When Menu button is pressed the disc menu will be turned on for you to select. Also play and pause can
be switched with the Pause button on the remote. Moreover, such as menu play, title play, sequence play etc., these
different play modes are offered.
a) Menu Play (compatible with DVD, SVCD,VCD2.0 discs)
. Press Menu Button
● TV screen displays the DVD Root Menu when a DVD disc is loaded.
● When a SVCD or VCD 2.0 disc is loaded, SVCD OR VCD 2.0 menu will be displayed on the
screen (when PBC is off) (At this moment, press PBC button once to display current PBC state).
● PBC is initialized on when a SVCD or VCD2.0 disc is loaded.
. When a DVD disc is loaded, you can press Arrow buttons to highlight the menu item you want to
choose; As SVCD or VCD2.0, you can press Numeric buttons to select a track to play.
. Press Enter or play button, you can begin play with the highlighted track.
. Return when playing: When a DVD disc is playing, press Menu (PBC) button, and you can return to
Root Menu; As SVCD, VCD2.0, and PBC is on, press Menu (PBC) button, you can return to the
menu.
. Stop
1) When you press Stop button for the first time, the player turns into Pre stop state. At the same time
the OSD appears "Pre stop". To begin the title over, press Stop twice.
2) In Pre stop state, the player remembers where you stopped, when you start playing the disc again,
the DVD player picked up where you left off.
3) In stop state, when you press Play, the player enters sequence playback mode.
● For the disc protection, before you press Open/Close button to eject the disc tray when playing,
please press Stop button at first. After taking out the disc press Open/close again to close the tray.
● If you're not going to use the DVD player for a long time, be sure to remove the electronic plug.
b) Program play (compatible with DVD, SVCD, VCD, CD, CD-G, HD-CD, WMA, MP3/JPEG disc)
The Program playback option allows you to enter the order in which you want chapters or tracks
to play, maximum to 16.
● Program Menu:
DVD, WMA, MP3/JPEG discs:
If PBC is on, this operation will turn PBC off while the chapter/tracks plays in programmed
order.
10