Dive Pool Systems Dive Smart Sanitizer G1 Installation And Operation Manual

Chlorine and Copper Generator for Residential Swimming Pools
For pools with a minimum flow rate of 30 gallons per minute (1HP and smaller pumps):
A maximum of 45,360 L (12,000 Gallons) of water can be treated with one Dive Smart
TM
Sanitizer G1 unit. Maximum output of hypochlorous acid equivalent to 0.143 kg (0.32 lb) of
free available chlorine per day.
For pools with a minimum flow rate of 35 gallons per minute (most 1HP pumps):
A maximum of 75,600 L (20,000 Gallons) of water can be treated with one Dive Smart
TM
Sanitizer G1 unit. Maximum output of hypochlorous acid equivalent to 0.233 kg (0.51 lb) of
free available chlorine per day.
For pools with flow rates above 40 gallons per minute (1.5HP pumps and up):
A maximum of 113,400 L (30,000 Gallons) of water can be treated with one Dive Smart
TM
Sanitizer G1 unit. Maximum output of hypochlorous acid equivalent to 0.345 kg (0.76 lb) of
free available chlorine per day.
For Outdoor or Indoor Use.
4000 parts per million (mg/Liters) of salt should be used.
For swimming pools, a range of 1-3 ppm of free available chlorine must be maintained.
READ THE LABEL AND OPERATING MANUAL BEFORE USING
REGISTRATION NO. 32799 PEST CONTROL PRODUCT ACT
WARNING: Staining of pool surfaces may occur due to deposit of copper salts. Excessive levels
of copper will increase the probability of this occurrence.
Nov13, 2017
Installation and Operation Manual
Dive Smart Sanitizer
By Formarum Inc.
CONTROLS BACTERIA AND ALGAE
In Swimming Pool Waters
DOMESTIC
KEEP OUT OF REACH OF CHILDREN
Formarum Inc., 55 West Beaver Creek Rd, Unit 44
Richmond Hill, Ontario, Canada L4B1K5
1-416-725-9466
TM
G1