Advertisement
Quick Links
6
Turn screws to the right to tighten.
7
Release the blade lock by pressing the button on the
left side of the locking arm. The button should click
into place.
8
Pull the upper blade adjustment bracket back to release
the blade set. Your blade set is now zero-gapped.
9
Remove blade assembly by pushing down on the front
of the blade.
USE AND CARE
Andis Blade
Zero Gapper
For Outliner
& Styliner
®
®
#04521, #04604, #26704, #32859
Requires only a screwdriver to adjust blade.
Phillips for Outliner
and T-Outliner
®
flathead and phillips for Styliner
Congratulations—you just went first class when you bought this
Andis appliance. Careful workmanship and quality design
have been hallmarks of Andis products since 1922.
Andis Company
1800 Renaissance Blvd. Sturtevant, WI 53177
1-800-558-9441 Canada: 1-800-335-4093
info@andisco.com w w w. a nd is. com
KEEP THIS FOR YOUR RECORDS
Form #04762
©2013 Andis Company, U.S.A.
Blades
;
®
®
Printed in Taiwan
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Andis Blade Zero Gapper
Summary of Contents for Andis Blade Zero Gapper
- Page 1 Styliner ® Congratulations—you just went first class when you bought this Andis appliance. Careful workmanship and quality design have been hallmarks of Andis products since 1922. Andis Company 1800 Renaissance Blvd. Sturtevant, WI 53177 1-800-558-9441 Canada: 1-800-335-4093 info@andisco.com w w w.
- Page 2 FOR USE ON OUTLINER BLADES: Place front end of blade under lip of blade gapper. Push the upper blade adjustment bracket forward ® Place holes on the blade assembly onto the pins of the as far as it will go until the upper blade is firmly Using a small screwdriver, turn screws 1/4 turn blade gapper and pull back on the base of the blade.
Need help?
Do you have a question about the Blade Zero Gapper and is the answer not in the manual?
Questions and answers