Proper electrical codes. Check applicable electrical codes installation is required for maximum system to ensure compliance. Installation of the Liebert performance. AccuVar ACV Series Surge Protective Device should only be performed by qualified personnel.
Note: To maintain the integrity of the “O” shipping agency and forward a copy to your rings, protection against direct sunlight is local Liebert Sales Representative. advised. Equipment Performance – For maximum system Storage performance, the unit must be located as close to...
SPD units for the line (phase), neutral (if used), under normal operation and only conducts during and transient ground connections. very short duration transient conditions. Liebert AccuVar ACV Series SPD units contain Voltage Ratings & UL approved 300 kAIC internal system fusing to Power Source Configurations protect against device failure.
Surge ® Suppression Systems Connection An insulated grounding conductor is recommended for the SPD. The grounding conductor should be With the AccuVar’s parallel connection, the length the same wire size as the associated power of wiring to the transient voltage surge suppression conductors and should be connected in close (SPD) unit...
Surge ® Suppression Systems VOLTAGE RATINGS & POWER SOURCE CONFIGURATIONS Nominal Maximum Continuous Model Voltage Source Configurations Operating Voltage Operating Voltage Code 130 L-N 100N 130 L-N 110N 150 L-N 120N 275 L-N 230N 320 L-N 277N Single Phase L-N, 2 W +G 420 L-N 347N 130 L-L...
PRE- Corrective Maintenance CAUTIONS MUST BE FOLLOWED WHEN SERVICING THIS UNIT. The Liebert AccuVar ACV Series SPD is designed TO PREVENT RISK OF ELECTRICAL for years of trouble-free operation. However, even SHOCK, TURN OFF AND LOCK OUT the most reliable equipment may fail under ALL POWER SOURCES TO THE UNIT abnormal conditions.
Surge ® Suppression Systems Figure 2. Installation Diagram. *If neutral is provided, a reliable neutral must be pulled to the AccuVar. Installation, Operation ACV Series and Maintenance Manual - 8 - Rev 2, 3/00...
Surge ® Suppression Systems LIMITED WARRANTY This Warranty is given ONLY to purchasers who buy for commercial or industrial use in the ordinary course of each purchaser's business. General: Control Concepts' products are in our opinion the finest available. We take pride in our products and are pleased that you have chosen them. Under certain circumstances, we offer with our products the following Five-Year Warranty Against Defects in Material and Workmanship.
Page 11
Surge ® Suppression Systems Limitations: • THIS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. • USER'S SOLE AND EXCLUSIVE REMEDY IS REPAIR OR REPLACEMENT OF THE CONTROL CONCEPTS PRODUCT AS SET FORTH HEREIN.
Surge ® Suppression Systems DECLARATION OF CONFORMITY All models of the AccuVar Series are in compliance with the EMC Directive 89/336/EEC, conforming to EMC standard IEC 1000-4-4 and IEC 1000-4-5. ----- Office of the Vice-President of Engineering, Binghamton, NY USA, June 1996. Installation, Operation ACV Series and Maintenance Manual...
Need help?
Do you have a question about the AccuVar ACV Series and is the answer not in the manual?
Questions and answers