g
Application
For use with circuit breaker type TED136 and current limiter
TEDL36 (015, 020, 030, 060, 100).
Installation
WARNING: Danger of electrical shock or injury.
Turn OFF power ahead of the panelboard o r
switchboard before working inside the equipment o r
removing any component
installed and maintained by properly trained and
qualified personnel only.
In the following instructions and figures, numbers in brackets
refer to the items in Table 1.
1. Confirm the contents of the kit. These kits are for
assembling fillers for TED6-frame Spectra circuit breakers
with TEDL current limiter on Spectra APNB bolt-on style
interiors. The vertical space required is 4.125 in. (3X).
DEH40392 Installation Instructions
Spectra Series™ Power Panelboards
Circuit Breaker Cover Kit
Catalog Number
.
Equipment is to be
Figure 1. Parts Included In the circuit breaker filler kit AMCB6TEDL.
AMCB6TEDL
The kit contains parts for 36W, 40W, and 44W
panelboards and 40W and 45W switchboards. Choose the
appropriate filler from the kit by matching its width with
the width of the existing fillers. Discard the other filler.
Figure 1 shows all the parts included in this kit, which are
listed in Table 1.
Item Description
#CM 36, 40W TEDL DB 3X
1
Filler
#CM 44, 45W TEDL DB 3X
2
Filler
3
Cover support 3X
4
Barrier center
5
Spacer plate TED6 w/TEDL
6
Steel drive rivet #10 x
Thread-forming screw,
7
3
10-32 x
/
"
8
8
Instruction sheet
Table 1. Parts list for kit AMCB6TEDL.
R01
Part #
Qty.
168D1930P3
1
168D1930P4
1
208C1850P3
2
252B1667P1
1
252B2056P8
1
1
/
"
331A3329P2
2
2
N722EP16006B6
2
DEH40392
1