Setting The Dlna Network; Installing The Dlna Application - Samsung LA40A750R1R User Manual

Setting the DLNA Network

DLNA allows you to watch videos and pictures saved on your PC on your TV through a network
connection in Wiselink Pro mode. This removes the need to copy them to a USB storage device and then
connect the device to your TV. To use DLNA, the TV must be connected to the network and the DLNA
application must be installed on your PC.
Network Connections Diagram
LAN
1. Connect the [LAN] port on the rear panel of the TV to the external modem with a LAN Cable.
2. Connect the PC to which the "DLNA PC Share Manager" program will be installed and the external
modem using a LAN cable.
3. Connect the LAN port on the wall and the external modem with a Modem Cable.
➣
You can connect the TV to the PC directly without connecting it through a Sharer(Router).
Connecting to the Network
1. When connecting to the network is complete, set up the network on the TV.
A Wireless Internet connection does not support DLNA.
➣
The first 3 digits (subnet address) of the IP addresses of the TV and the PC must be the same
➣
(e.g. IP Address: 123.456.789.XX )
2. Run a "Network Test" to check the network settings.

Installing the DLNA Application

To play content on the PC on the TV, you have to first install the application.
System Requirements
1. Insert the Program CD supplied with this TV into your PC.
2. 20MB of free hard disk space is needed for the program installation.
If you share files, up to 20MB of hard disk drive space is required for each 100 files.
➣
If you cancel file sharing, the hard disk drive space used for the thumbnail information is also
➣
freed.
Supported Formats
1. Image: JPEG (jpg, jpeg)
2. Audio: MP3 (mp3)
3. Video: MPEG1(mpg, mpeg), MPEG2 PS/TS(mpg, mpeg, trp, ts, tp), divx(mpg, mpeg, avi), MPEG4 /
H.264 (mpg, mpeg)
tV
External Modem
(ADSL/VDSL/Cable tV)
1


English - 0
PC
LAN