Table of Contents
Summary of Contents for Imtra EX210512
- Page 1 Electronic Wiper Control For five Exalto H.D. Wipers Imtra Corporation • 30 Samual Barnet Boulevard New Bedford MA 02745, U.S.A. • T (508) 995 7000 • F (508) 998 5393 • Tollfree fax (508) 989 2580 • E wipers@imtra.com • I www.imtra.com...
-
Page 2: Table Of Contents
Contents 1 General ............. . . 4 1.1 Functions . -
Page 3: General
1 General Description This electronic wiper control consists of a touch pad with 4 metres (13”) connection cable and a separate junction box. The operation is based on a Functions microprocessor and controls up to three wipers. Each wiper can be switched Brief explanation of buttons and LED’s. -
Page 4: Led Indicator Bar
2 Installation LED indicator bar The LED’s on the indicator bar (pos. 6) indicate the following settings: Dimensions touch pad Ø3,5 Intermittent modes: Maximum delay (10 sec): Illuminated LED: A Medium delay (5 sec): Illuminated LED’s: A + B Minimum delay (2,5 sec): Illuminated LED’s: A + B + C Continuous mode: Low speed:... -
Page 5: Dimensions Junction Box
3 Electric connections Dimensions junction box General lay out WIPER CONTROL WIPER CONTR W 4 W 5 ON/OFF WASH Exalto Dimensions in mm. Mounting holes Installation of junction box 4m (13’) The connection cable of 4 m (13”) length allows installation of the junction box Wiring codes at such a distance, that the ‘clicking’... -
Page 6: Wiper Connections
Wiper connections Fuse sizes The power supply line on the circuit board in the junction box has an integrated fuse of 2A. Each wiper outlet has an integrated fuse of 10A for 12V systems and 6A for 24V systems, located in the junction box. W 1 W 2 W 3 W 4 W 5 Cable sizes... - Page 7 4 Operation Wipe/wash program This wiper control has a built in ‘smart’ wipe/wash program which can be ON/OFF switching activated by pressing the wipe/wash button (pos. 7). When shortly pressing With the ON/OFF button (pos. 1) the wipers can be switched on. When pressing this button, the standard program will be started: this button once, an internal test is carried out.
- Page 8 Synchronised operation All wipers will run synchronised in each speed mode. Self parking When pressing the ON/OFF button (pos. 1) the wipers will go to the corner of the screen and park, providing the wiper motors are equipped with a self-park function.