Table of Contents
Advertisement
Unscrew the screw 1 with the
seat key 2.
Pull the seat toward the rear to
release it from its holders.
Installing seat
Insert the seat with the
mounts 3 in the holders 4.
If too much pressure is ap-
plied in the forward direc-
tion, there is a danger that the
motorcycle will be pushed off its
stand.
Make sure that the motorcycle is
steady on its stand.
Push the seat as far as possi-
ble toward the front.
Tighten the screw 1 hand-tight
with the seat key 2.
4
47
z
Advertisement
Table of Contents
