Table of Contents
Advertisement
Operating Instructions and Parts Manual
MAINTENANCE
1. Always store the Manual Fluid Extractor in a well-protected area where it will not be exposed to inclement
weather, corrosive vapors, abrasive dust, or any other harmful elements.
2. Keep the Manual Fluid Extractor clean for better and safer performance.
3. Inspect Reservoir, Hoses, Caps, Gaskets, Seals, Gauge and Adapters periodically, and if damaged, replace
them.
4. Rinse the evacuator reservoir, pump, adapter, and tubes with clean solvent or engine degreaser, and allow
them to dry thoroughly.
07/14
2014 ©OEM-TOOLS
MANUAL FLUID EXTRACTOR
8
24397
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MANUAL FLUID EXTRACTOR and is the answer not in the manual?
Questions and answers
the tool will not pump. there seems to be back pressure. this happened after the device automatically shut down because it filled to the top
@Ken McCartney you need to release the vacuum plug at the base of the handle and then re insert it.