Samsung HP-P5071 Owner's Instructions Manual page 15

Hide thumbs Also See for HP-P5071:

Table of Contents

Set the Speaker Guide Bracket into the square grooves located on either side of the

PDP's bottom rear, then push the Speaker Guide Bracket towards the center (as the

arrow illustrates). Secure the Speaker Guide Bracket with provided screws @.

(Always use the proper screws, as indicated.)

Secure the Speaker Dust Cover by setting it into the grooves located on the front side

of the speakers.

Connect the speakers to the PDP using the speaker cable.

The connection terminals are on the rear side of both the PDP and the speakers.

(Match the color coded terminals and cables.)

Note

• When moving the PDP with the speakers attached, be sure to hold on to the PDP

to prevent damage. (Damage may occur to the speaker connecting brackets or

the speakers.)

• Speakers of 8Ω Impedance, 15W Nom. Power, 30W Max. Power is recommended.

Screw②

BLACK

BLACK RED

RED

Table of Contents