Recording - Samsung BN68-01983A-00 User Manual

TV Remote Control Buttons Available in Anynet + Mode
Device Type
Anynet + Device
Device with built-in
Tuner
Audio Device
The Anynet + function only works when the active source on the TV remote control is set to TV.
N
The ∏ button works only while in the recordable state.
N
You cannot control Anynet + devices using the buttons on the TV. You can control Anynet + devices only using the TV remote
N
control.
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet + device.
N
The Anynet + functions do not operate with other manufacturers' products.
N
The π, μ operations may differ depending on the device.
N

Recording

¦
You can make a recording of a TV programme using a recorder.
Press the ∏ button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
The current TV programme is recorded in the Watching TV status. If you are watching video from another device, the video
N
from the device is recorded.
You can also record the source streams by selecting Record after pressing the TOOLS button.
N
Before recording, check whether the antenna jack is properly connected to the recording device.
N
For the antenna connection to the recording device, refer to its user manual.
N
Operating Status
After switching to the device, when the
menu of the corresponding device is
displayed on the screen.
After switching to the device, while playing
a file
After switching to the device, when you
are watching a TV program
When Receiver is activated
English - 
Available Buttons
Numeric buttons
▲/▼/◄/►/wheel/ ENTERE buttons
Colour buttons / EXIT button
π(Backward search) / μ(Forward search) /
∫(Stop) / ∂(Play) / ∑(Pause)
P > / P < button
Volume / MUTE button