Baracoda All in One Printer Communication Protocol Manual page 11

B = Vibration duration on BARCODE LOST event
C = Vibration duration on NACK event
Durations in 1/10 sec
Response 0 (1 = ERROR)
0x42 (Since version 3.01.00)
Command ID
Description Get beeps
Length 0
payload none
Response 1 byte:
Bit A.0 = 0
disable barcode decoded beep
Bit A.1 = 0
disable barcode acknowledgement beep
Default settings:
0x00
0x43 (Since version 3.01.00)
Command ID
Description Set beeps
Length 1
payload 1 byte:
Bit A.0 = 0
disable barcode decoded beep
Bit A.1 = 0
disable barcode acknowledgement beep
Response 0 (1 = ERROR)
enable barcode decoded beep, 1
enable barcode acknowledgement beep, 1
enable barcode decoded beep, 1
enable barcode acknowledgement beep, 1
Data Capture
for Workforce
in Motion