Advertisement
Quick Links
This install guide covers all Echoflex Solutions switches, models and descriptions below.
The character n in the model number is replaced with U for 902MHz, Y for 868MHz and
J for 928 MHz radios. The character x is replaced with a color indicator ( W = white, G =
gray, B = black, A = light almond, V = ivory).
PTM365nx - Single decorator style barrier switch
PTM365Dnx - Dual decorator style barrier switch
Available in white and gray. Includes switch, face plate, barrier plate and mounting
screws
PTM265nx - Single paddle decorator style wireless surface mount switch
PTM265Dnx - Dual paddle decorator style wireless surface mount switch
Available in black, light almond and ivory. Includes switch and surface mount plate
ETRS1nx - Single paddle wave style wireless surface mount switch
ETRS2nx - Dual paddle wave style wireless surface mount switch
Available in white and black. Includes switch and clear double sided tape
ETRH1nW - Single paddle hand-held wireless switch, white
ETRH2nW - Dual paddle hand-held wireless switch, white
PTM265KCAnW - Keycard activated wireless surface mount switch, white
Product Overview
The switches communicate wirelessly with Echoflex lighting controllers to control the
internal relay and/or output dimming level. Common switch applications include basic
on/off lighting or dimming.
The energy of a finger press upon the ON or OFF side of the switch paddle generates
sufficient energy to transmit the switch event. Additionally, as there is no battery to
replace, there is also no maintenance.
Some models have dual paddles which operate identically to the single paddle switches.
Each paddle can be linked to different controllers for multiple circuit control from one
wall station.
Wireless Switches
Installation Guide
PTM-ETR
Advertisement
Related Manuals for echoflex PTM365nx
Summary of Contents for echoflex PTM365nx
-
Page 1: Installation Guide
Wireless Switches Installation Guide This install guide covers all Echoflex Solutions switches, models and descriptions below. The character n in the model number is replaced with U for 902MHz, Y for 868MHz and J for 928 MHz radios. The character x is replaced with a color indicator ( W = white, G = gray, B = black, A = light almond, V = ivory). -
Page 2: Preparing To Install
Preparing to Install Careful consideration should be made when locating the controllers and switches based on the construction materials in the space and possibility of tenant’s furniture disrupting the transmissions. The switch should be installed in the space where the controller device is controlling the light fixtures or circuits. - Page 3 PTM265 Decorator Style Surface Mount Switches Mount the surface mounting plate to the wall surface with screws and wall anchors (not supplied). Mount the switch to the plate with the two short #6-32 screws provided. Install a decorator style faceplate (Leviton 80401 or equivalent, not supplied) over the switch.
- Page 4 CSA Standard C22.2 # 42-1-13 3060167 For more information on Echoflex Solutions, scan the QR code: Copyright 2013-2018 Echoflex Solutions, Inc. | Specifications subject to change without notice. Document #8DC-5303 | Revision 3.0 | 8188M21-5303-1 | Rev F Echoflex Solutions, Inc.