Download Print this page

Simrad E0102 Instructions

Alarm panel

*988-10826-002*

Instructions

E0102 Alarm Panel

GENERAL

The E0102 Alarm Panel is designed for use with the E5024 ECDIS system, and the MARIS

ECDIS900 MK5 PC and Simrad M5024 monitor. The unit gives an audible and a visual alarm for

any ECDIS system, including power supply failure.

This type of alarm is mandatory on systems requiring Wheelmark certification.

Pushing the button will mute the audible alarm. The visual alarm will remain lit as long as the

alarm situation remains. The indication will cease if the alarm is cancelled on the ECDIS

system.

The E0102 is panel mounted and fixed from front by the four enclosed screws.

Select a mounting location where a visual alarm on the panel not will disturb the operator's

night vision!

Cable(s) should be fixed with the enclosed cable strap to spacers for the circuit board.

Connect the E0102 Alarm Panel according to the illustration below.

Note that the power supply for E0102 must be independent of the power supply to the E5000

Processor.

Table of Contents

Do you have a question about the E0102 and is the answer not in the manual?

Page 1 Cable(s) should be fixed with the enclosed cable strap to spacers for the circuit board. WIRING THE E5000 PROCESSOR Connect the E0102 Alarm Panel according to the illustration below. Note that the power supply for E0102 must be independent of the power supply to the E5000 Processor.
Page 2 Page 2 of 3 WIRING THE MARIS ECDIS900 MK5 COMPUTER E0102 ALARM PANEL TECHNICAL SPECIFICATIONS Weight: ....................0.25 kg (0.55 lbs.) Material: ..................Epoxy coated aluminum Alarm supply: ..................24VDC -10%/+30% Environmental Protection: ..........IP44 from front when panel mounted Color: ........................
Page 3 Page 3 of 3 DIMENSIONS CT&A CABLE TECHNICAL SPECIFICATIONS Power supply ......................24 V DC Compass safe distance ..................0.4m (1.2 ft)