Summary of Contents for Eka Systems BlueMeter
-
Page 1: Hardware Setup
6/10/02 Hardware Setup Guide © Eka Systems Inc. 444 N Frederic Ave • Suite 315 • Gaithersburg, MD 20877 Phone 301.990.3450 • Fax 301.990.3451 Eka Systems Proprietary 3/18... - Page 2 6/10/02 STEP 1 Identify the hardware Identify the following components that are part of the BlueMeter Hub package. § BlueMeter hub, with its attached Bluetooth dongle. § BlueMeter Module for the electric meter. § 5V DC adapter to power the BlueMeter hub.
- Page 3 Hub. (Use the username and password provided with the Hardware setup guide). 10. The user will see the screen as shown in Figure 5 of the BlueMeter Network Manager User Guide. 11. Click on ‘Set Hub IP Address’ from the Advanced Configuration option.
-
Page 4: Fcc Notice
-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. The BlueMeter add-on card must always be installed as the innermost option -- Connect the equipment into an outlet on a circuit different from that to which the receiver is board (the board closest to the kV meter’s main board).
Need help?
Do you have a question about the BlueMeter and is the answer not in the manual?
Questions and answers