Advertisement
C) If desired, add additional devices to be switched from the same button by repeating steps A and
B. In the picture below, the user created a custom scene that turns off all lights on the ground
floor and added this to the "Top push button". Now when the user presses the "Top push
button" on the Keypad in the Kitchen, the Office outlet switches ON or OFF, and all lights on the
ground floor that are wired to free@home devices will turn OFF.
D) Repeat until all settings are properly defined for this button.
E) Repeat all steps for the other three Keypad buttons.
3.1
LED Settings
Setting
LED switch-on
brightness night [%]
LED switch-on
brightness day [%]
LED mode
Product Manual 2CQA 100 007 B0001 │ 2018-09-28
Description
User can adjust
brightness of LED
User can adjust
brightness of LED
· "Orientation Light":
LED lighting to help
· "Status Indication":
user navigate
Configuring the Keypad
Options
0 to 100 in
increments of 1
0 to 100 in
increments of 1
LED is always ON to
find Light Switch at night
LED shows status of
light, i.e. LED is ON
when switch is ON, and
OFF when switch is OFF
Image
│7
Advertisement
