Date; Sat Address; Max Sim Sta - Toro OSMAC G3 User Manual

Date

Clock Set: 12:00am
Clock Mode: Am/Pm
Date Mode: MMDDYY
MMDDYY
Date: 01/01/16 Fri

Sat Address: 001

Max Sim Sta: 06

Step 1 – While at the Home display, press Select
Step 2 – Press DOWN
Step 3 – Press DOWN
Step 4 – Use the LEFT and RIGHT
Use the UP and DOWN
Step 5 – Press Select
Sat Address
Clock Set: 12:00am
Clock Mode: Am/Pm
Date Mode: MMDDYY
Date: 01/01/16 Fri
001
Sat Address: 001
Max Sim Sta: 06
Step 1 – While at the Home display, press Select
Step 2 – Press DOWN
Step 3 – Press DOWN
Step 4 – Use the UP and DOWN
use a unique address from other satellites. If the satellite belongs to a group that will operate in
synchronous with each other, use the same address as the satellites within the group.
Step 5 – Press Select
Max Sim Sta
Clock Set: 12:00am
Am/Pm
Clock Mode: Am/Pm
Date Mode: MMDDYY
Date: 01/01/16 Fri
Sat Address: 001
Max Sim Sta: 06
Step 1 – While at the Home display, press Select
Step 2 – Press DOWN
Step 3 – Press DOWN
Step 4 – Use the UP and DOWN
active. Depending on water source supply and power demand, you can set as many as 16 stations to be
active at the same time.
Step 5 – Press Select
until Settings is selected and press Select
until Date is selected and press Select
arrows to navigate between the Day, Month and Year parameters.
arrows to set the correct Day, Month and Year.
when finished.
SELECT SELECT
until Settings is selected and press Select
until Sat Address is selected and press Select
arrows to set the desired satellite address. For independent operation,
when finished.
SELECT SELECT
until Settings is selected and press Select
until Max Sim Sta is selected and press Select
arrows to set the number of maximum stations that are simultaneously
when finished.
SELECT
SELECT
to access the controller menu.
SELECT
SELECT
SELECT SELECT
.
SELECT
SELECT
to access the controller menu.
SELECT SELECT
SELECT
SELECT
to access the controller menu.
SELECT SELECT
SELECT SELECT
11
.
.
.
SELECT SELECT
.
.
SELECT
SELECT