Page 2
Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
Page 3
Safety Precautions Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. Introduction The L/R In-Out Lip SYNC Corrector is a compact device that corrects audio delays between audio and video. When distributing video over long distances through multiple devices like distribution amplifiers and set top boxes there can sometimes be a noticeable delay which results in audio being played before the video.
5. Specifications Input Port 1 x L/R Sample Frequency 48 kHz Output Port 1 x L/R Input Impedance 44K Ω Output Impedance 1k Ω Power Supply 5V / 1A DC ( US/EU standards, CE/FCC/UL certified) ESD Protection Human body model: ± 8kV (air-gap discharge) ±...
6. Operation Controls and Functions 6.1 Top Panel POWER LED: The LED will turn blue when the power is connected. ① 6.2 Left Panel L/R IN: These jacks are to connect with input sources such as DVD/Blu- ① Ray players using stereo cables in order to receive an audio signal. 6.3 Right Panel L/R OUT: These jacks are where you connect an output stereo cable to ①...
6.4 Front Panel Lip SYNC switch: This switch has eight settings that allow users to set the ① audio output delay from 0~300 milliseconds in order to have perfectly synched audio and video. 6.5 Rear Panel DC 5V: This slot is where you plug the 5V DC power supply into the unit and ①...
Need help?
Do you have a question about the DCT-18 and is the answer not in the manual?
Questions and answers