Advertisement
C O N N E C T I N G T H E L X 1 1 E m e r g i n g f r o m the
chassis o f the L X 1 1 n e t w o r k are f o u r w i r e s : t w o
black, one green and one red. Connect the green
w i r e to the red t e r m i n a l post of the L E 1 0 A low
frequency
the red t e r m i n a l post of the L E 2 0 h i g h frequency
transducer. Connect the black w i r e s to the black
posts of the speakers. Since these t w o w i r e s are
c o n n e c t e d i n t h e i n t e r n a l c i r c u i t r y o f t h e n e t
w o r k , either black w i r e may be connected to e i t h e r
speaker.
C O N N E C T I N G T H E L X 8
connected i n the same w a y as the L X 1 1 . Connect
the g r e e n w i r e t o t h e r e d t e r m i n a l post o f t h e
L E 1 4 A low frequency
red w i r e to the red t e r m i n a l post o f the L E 2 0 h i g h
frequency transducer. Connect the black w i r e s to
the black posts o f the speakers — either w i r e to
e i t h e r speaker.
C O N N E C T I N G T H E N400, N1200, N2400 and L X 2 .
Each of these four dividing networks is connected as
shown i n the diagram below:
network
To Amplifier
networks are connected to speakers as shown i n the
Network
To Amplifier
loudspeaker. Connect the red w i r e to
C O N N E C T I N G T H E L X 5 , LX13, and LX10. These
diagram below:
The L X 8 n e t w o r k is
loudspeaker. Connect the
Extended Range
or low frequency
speaker
High frequency
transducer
Low frequency
speaker
High frequency
transducer and
horn or horn/lens
Advertisement
