ShoX duke User Manual

contents
1. Let's get funky
(turning on your shoX duke + button control)
2. Blinky light thingy
(a guide to the colourful blinky light thingy)
3. Hook a brother up
(pairing different devices)
4. Get wired
(using the 3.5mm aux cable)
5. Play your tunes direct from your device
(using the USB port)
6. Power Up
(charging your shoX duke)
1. so you wanna get funky do ya?
(turning on your shoX duke + button control)
Right now, it's time to bring this ol' boy to life! Don't worry,
we're going to do this together. See that analogue dial on
the top of your shoX duke, to the far left? This lil guy is
going to be your control centre for using your shoX duke.
To turn your shoX duke on, simply turn the dial clockwise
to select "BT" for Bluetooth mode. You should see a blue
light flashing next to the Bluetooth icon. Sweet success!
Now remember this dial, you're going to need it when you
want to choose between Bluetooth, Aux in and USB
mode.
Now let's get to know these nifty track control buttons:
Play or pause your beats in USB or Bluetooth mode/ Hold
down to disconnect Bluetooth connection in "Bluetooth"
mode
Skip to the next track
Return to the previous track
When you want to put your fav song on repeat (only in
USB mode)
2. blinky light thingy 3.
(a guide to the colourful blinky light thingy)
It's time to get to know these colourful lights a bit better, First of all, make sure your blinky light thingy is rapidly
wouldn't you say? flshing blue – now you're in Bluetooth pairing mode.
Make sure your device and your shoX duke are within 1
metre of each other.
• Is rapidly flashing blue – you're ready to pair with a
flawless Bluetooth connection
iPhones & iPads
• Is slowly flashing blue – you have successfully paired
• go to general -> Bluetooth & gracefully swipe it to the
your device to the shoX duke or you've paused a track
whilst in Bluetooth mode
• shoX duke will become discoverable, touch to connect
• Is glowing solid blue – you're enjoy the sweet sound of
• now is the blinky light thingy glowing a solid blue? I
shoX duke in Bluetooth mode
• Is green (aux cable connected) you're in "get wired"
mode or you've plugged in your USB. In USB mode,
Other cellphones & tablets
the green blinky light thingy will glow a solid green
• turn your Bluetooth on and search for "shoX duke"
when you've paused a track
• if you're prompted for a password, enter "0000"
• Is red – you're in "power up" mode (charging your shoX • check your Bluetooth device list & connect with your
retro)
hook a brother up
(pairing different devices)
"ON" position
knew you could do it!
shoX duke
(flip the page over
to continue...)
pure Bluetooth bliss
Brought to you by:
0861 77 88 88
www.tevo.co.za | info@tevo.co.za