OEM Tools 25980 Operating Instructions

Operating Instructions and Parts Manual 25980
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect yourself and others
by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or
damage to product or property. Please retain instructions for future reference.
CREE 3W RECHARGEABLE
LITHIUM-ION POCKET LIGHT
UNPACKING
After unpacking, inspect carefully for any
damage that may have occurred during
transit. Check for loose, missing, or
damaged parts. If any damage is observed,
a shipping damage claim must be filed
with carrier. Do not use the work light if
it appears damaged in any way, operates
abnormally or is missing parts.
MAX OUTPUT
MAX RUNTIME
Work Light Torch Light Work Light Torch Light
0
200 100
LUMENS LUMENS 4h
4h
WARNING
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
The following safety information is provided as guidelines to help you operate your work light under the safest possible conditions. Any
tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed.
The following safety instructions are to provide the user with the information necessary for safe use and operation. Please read and
retain these instructions for the continued safe use of your work light. Failure to follow instructions listed below may result in serious
injury. In addition, make certain that anyone that uses the equipment understands and follows these safety instructions as well.
Thank you very much for choosing an OEMTOOLS Product!
For future reference, please complete the owner's record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this
product before you begin using it. We strongly recommend this work light is not modified and/or used for any application
other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the
work light until you have first contacted OEMTOOLS to determine if it can or should be performed on the product.
10/15
2015 OEMTOOLS