Call Waiting - Mercedes-Benz Audio 20 Operating Instructions Manual

Using the telephone
58
To activate the call on hold: select Resume.
X
The call on hold is activated. If you select
Hang Up, the call on hold is also ended.
On some mobile phones, the call on hold
i
is activated as soon as the active call is
ended.
Conference call
This function depends on your mobile phone
network provider and the mobile phone (see
the manufacturer's operating instructions).
You can interconnect active and held calls.
This permits several parties to hear one
another and speak with one another.
Add a call ( page 56).
X
Y
or
Answer an incoming call (
X
Conference
To select
X
menu: turn and press the controller.
The new participant is included in the con-
Conference
ference call.
the telephone menu.
Incoming call during an existing call

(call waiting)

The call waiting function depends on your
mobile phone network provider and your
mobile phone. Depending on the mobile
phone used, behavior when answering a call
may vary (see the manufacturer's operating
instructions).
Call waiting: if you receive a call while
already in a call, a message is shown. You also
hear a tone. You can decide whether to
accept or reject the call.
Accepting:
X
or
X
i
Rejecting:
X
or
X
page 58).
Y
in the telephone
is displayed in
Ending an active call
X
or
X
To select Accept: press the controller.
Press 6 on the multifunction steering
wheel.
The incoming call is active. Depending on
the mobile phone used, the call which was
previously active is put on hold or ended
(see the manufacturer's operating instruc-
tions). If the call is on hold, you can switch
back and forth between the two calls (call
waiting) ( page 57).
Y
Depending on the mobile phone, you may
also be able to accept the incoming call
(call waiting) on your mobile phone. This
function and behavior depends on your
mobile phone network provider and the
mobile phone (see the manufacturer's
operating instructions).
To select Reject: turn and press the con-
troller.
Press ~ on the multifunction steering
wheel.
The behavior after the call is rejected
depends on your mobile phone and mobile
phone network provider.
Option 1: The originally active call is ended
and the incoming call is accepted.
Option 2: Both calls are ended.
To select = in the telephone menu: turn
and press the controller.
Press ~ on the multifunction steering
wheel.
The active call is ended.