Lavex 457LAVEXDM15 User Manual page 7

Change Filters frequently to keep your LAVEX JANITORIAL Vacuum running at optimal efficiency.
A
FILTER BAG
1
Make sure that vacuum is unplugged and in the OFF position.
2
To open bag cover, press the release button on top of the bag cover and open cover.
3
Remove used filter bag from vacuum and discard. DO NOT re-use the bag.
4
Insert NEW filter into vacuum.
5
Close cover and snap into place.
Safety feature -- If no bag is put into the machine, the vacuum will not turn on.
This saves the vacuum from unnecessary damage due to no bag filter in the unit.
B
MOTOR INTAKE FILTER
1
Make sure vacuum is unplugged and in the OFF position.
2
Remove filter bag and then lift motor intake filter from the bag housing.
3
Wash filter or replace with a new filter. Wash in warm soapy water, rinse and let air dry.
4
Replace filter and put in bag filter.
5
Close cover and snap into place.
C
CHANGING HEPA FILTER
1
Remove HEPA Filter by pushing down lightly on cover and pull away from unit.
2
Remove any excess foam tape from filter area.
3
Insert the NEW HEPA Filter by pushing lightly on the filter until the tabs snap into place.
KEEP YOUR FILTERS CLEAN FOR OPTIMAL EFFICIENCY
FILTERS
PROTECT YOUR MOTOR!
7